Installing eSIM(s) on Apple Devices

This help guide walks you through the steps required to install an eSIM on iOS devices. The guide was created using an iPhone with the most recent version of iOS software available at the time, iOS 16.3.

There are two installation options offered in this help guide: "Install using a QR code" or "Manual install."


Installing eSIM(s) on iOS Devices

Before You Start:

  1. Ensure a strong internet connection (Wi-Fi or good 4G).
  2. Verify that your device is eSIM compatible.
  3. Ensure the device is unlocked (not restricted to a specific network).

Method 1: Install Using a QR Code

Step 1:

  • Open the camera app and scan the QR code.
  • Tap "Mobile Plan".

    Screenshot_2023-02-14_at_12.21.39.png

Alternative Step 1:

  • Go to Settings > Mobile/Cellular Data > Add eSIM.
  • Tap "Use QR Code" and scan the QR code provided.

    Step_1.png

Step 2:

  • Tap "Continue" and wait up to 10 minutes for the eSIM to activate.
  • Tap "Done".

    Step_2.png

Step 3: Configure eSIM Settings

  • Set Default Line to "Primary" and tap "Continue".
  • Set iMessage & FaceTime to "Primary" and tap "Continue".
  • Set Mobile Data to your eSIM label and toggle "Allow Mobile Data Switching" as needed.

    Step_4.png

Step 4: Enable Data Roaming

  • Go to Settings > Mobile/Cellular Data.
  • Select the desired SIM and toggle Data Roaming to "On".

    Step_5.png

Method 2: Manual Installation

Step 1:

  • Go to Settings > Mobile/Cellular Data.

Step 2:

  • Tap Add eSIM > Use QR Code > Enter Details Manually.

    Step_1_Manual_install.png

Step 3:

  • Enter the SMDP Address and Activation Code provided by your eSIM carrier.
  • Tap "Next" and wait for activation.

    Step_2_Manual.PNG

Step 4: Configure eSIM Settings

  • Follow the same configuration steps as in Method 1.
Back to blog